Welcome to The Floor Stores Northern California San Francisco Bay Area Tile Flooring and Ceramic Tile Floor Construction Section

They have no additional surface applications and are typically more dense and durable than glazed tile. Thus they are more suitable for interior and exterior applications where wearability is a concern.

If your home has areas of heavy activity or kid “zones,” unglazed tile may be just the answer.

There are 5 steps in the ceramic tile manufacturing process: Mining, Blending and Mixing, Pressing, Glazing, and Firing.

Step 1 is elemental and earthy.

The process begins with the mining of the raw materials, which is a mixture composed of mostly clay and minerals.

Step 2 introduces mud into the mix.

The clay and mineral mixture is blended and mixed into a semi-fine powder.

Water is added to form a wet slurry or mud-like consistency. Then the slurry is pumped into a large dryer.

And the result? A fine clay powder that feels like warm, fine sand.

Step 3 applies pressure to the process.

Next, the clay is pressed or formed into a tile shape. These pressed tiles are called green tiles at this stage.

There is also another method called extrusion which can replace the pressing step. Extruded tiles are formed by forcing the clay material through a mold for the desired shaped versus pressing the tile.

However, pressing is the more common method used today. And after the green tiles are formed they are dried to remove some of the moisture.

Step 4 is the glaze phase.

It’s the next step in the manufacturing process for those tiles that will have a glaze.

If the tile is to remain unglazed it skips this step and goes directly to the firing kiln.

The glaze liquid is prepared from a glass derivative called frit and colored dyes. The glaze is applied by either a high-pressure spray or is poured directly onto the tile.

Step 5 really heats things up.

The ceramic tiles are now fired in the kiln at temperatures around 2,000 degrees Fahrenheit.

Tiles that are fired once after the glaze is applied are called monocoturra tile or single fired.

The other type is called biocuttura or double fired tile. Biocuturra tiles are first fired after the green tile is dried and then fired again after the glaze is applied.

An elegant, durable alternative is porcelain.

Aside from the two types of ceramic tile, glazed and unglazed, there is another category that continues to gain popularity – beautiful, elegant, porcelain tile.

Porcelain tile is made up of 50% feldspar and is fired at a much higher temperature than regular ceramic tile. This makes porcelain tile much harder and denser than other tile products.

Their high performance and low water absorption ratings of less than 0.5 percent make these tiles a worthy choice for your home.

Additionally, porcelain tile can be used for interior and exterior applications as well as heavy or commercial areas.

After the finished tiles have been inspected for quality assurances, they are packaged, crated and ready to be shipped.

A word to the wise.

Not all ceramic tile is suitable for each area of your home. The beautiful, decorative tile you might put on your kitchen backsplash may not be recommended for installation on the floor.

A rating system is called for and that’s exactly what the tile manufacturers have provided. Now let’s take a look at that system.

Got traffic? Here’s your ticket to smarter shopping.

Most manufacturers will have a rating system that is based on or supported by the American Society for Testing & Materials (ASTM). Many times you can find these ratings on the tile sample or in the product catalog.

The most common system rates ceramic tile abrasion resistance or the overall durability of the tile. There are 5 classes you should be aware of.

Class 1: no foot traffic. These tiles are suggested for interior wall applications only and not for the floor. May a shoe never touch them.

Class 2: light traffic. These tiles are suggested for interior wall applications and for residential bathroom flooring only.

Class 3: light to moderate traffic. These tiles can be used for residential floor and wall applications including bathrooms, kitchens, foyers, dining rooms and family rooms. They’re a good all-around performer.

Class 4: moderate to heavy traffic. These tiles are recommended for residential, medium commercial and light industrial floor and wall applications including shopping malls, offices, restaurant dining rooms, showrooms and hallways.

Class 5: heavy/extra heavy traffic. These tiles can be installed anywhere.  They will hold up in floor and wall applications at airports, supermarkets and subways. Tile doesn’t get any tougher.

You may also see a rating for Slip Resistance, which is measured by its Coefficient of Friction (COF). The higher the COF the more slip resistant the tile. This is important when selecting a floor tile for areas that get wet, such as your shower or bathroom floor.

Other ratings listed by the manufacturer might include: scratch resistance, moisture absorption, chemical resistance and breaking strength.

That’s a brief explanation of ceramic tile types, manufacturing processes and rating systems.

We hope that the information we’ve featured here leads you to a better understanding of how this beautiful and versatile product is created, and underlines the fact that ceramic tile flooring can help make your home. Why not set up your free in home design appointment now:

Albany/Richmond Alameda Oakland California Bay Area Tile Dealer Locations
Richmond, California is a residential inner suburb of San Francisco city and located in the western portion of Contra Costa
County, California with a zip code of 94804. The city was incorporated on August 7, 1905. The Floor Stores San Francisco Bay Area Ceramic Tile Installation centers and home improvement design stores corporate headquarters make Richmond, California their home. The Floor Stores Richmond California home improvement center proudly serves the communities of San Francisco, El Cerrito, San Pablo, Pinole, Hercules, Albany, Berkeley, Oakland, Emeryville, El Sobrante, South San Francisco, Moraga, American Canyon and Alameda. Proudly Serving the Northern California cities of El Cerrito, San Pablo, Pinole, Hercules, Albany, Berkeley, Oakland, Emeryville, El Sobrante, San Francisco, Moraga, American Canyon and Alameda.

Concord California East Bay Tile Dealer Locations

Concord, California, home of The Floor Stores California San Francisco East Bay Area Tile Flooring Installation Discount Dealer and home improvement design stores, is located in the largest city in Contra Costa County, California. The city is a major regional suburban East Bay center within the San Jose/ San Francisco Metropolitan Area, and is located just 31 miles east of San Francisco and was incorporated on February 5, 1905. Serving the zip code of 94520 and the East Bay cities of Pleasant Hill, Walnut, Lafayette, Martinez, Alamo Creek, Diablo, Danville, Clayton, Vacaville, Benicia, Fairfield and Sacramento. Proudly Serving the Northern California cities of Pleasant Hill, Walnut, Lafayette, Martinez, Alamo Creek, Diablo, Danville, Clayton, Vacaville, Benicia, Fairfield and Sacramento.

Dublin San Jose, Silicon Valley California East Bay Area Ceramic Tile Flooring Locations

Northern California San Jose, Silicon Valley area discount tile, carpet floors and other Tile flooring shoppers will notice the difference the minute they walk into one of our San Francisco East Bay, North Bay and South Bay flooring stores. The way our knowledgeable, friendly flooring staff is committed to helping you find the perfect floor that fits your family needs, lifestyle, and budget. We are able to assist in designing any type Bay Area floor that you will be proud of for years to come. Our buying power as one of the country’s leaders in flooring purchases of carpet with the major mills and the ability to purchase full containers of ceramic tile, natural stone flooring, hard wood flooring, and laminate flooring from all over the world assures you that the latest trends in fashion will be available and at the best possible price. Proudly Serving the Northern California cities of Pleasonton, Livermore, Tracey, San Ramon, Union City, Fremont, Hayward, Palo Alto, Milpitas, Sunnyvale, San Jose, San Mateo, Redwood City, Santa Clara, Mountain View and South San Francisco.

Pittsburg Antioch Stockton Modesto Central California Tile Store Locations

Proudly Serving the Northern California cities of Rio Vista, Elk Grove, Davis, Rancho Cordova, Galt, Lodi, Stockton, Manteca, Modesto, Tracey, Antioch, Oakley and Brentwood. Pittsburg, California is a city located in eastern Contra Costa County, Central California, the outer portion of the East Bay region of the San Francisco Bay Area. It has one BART station, the Pittsburg/Bay Point Station located in Bay Point. The current zip code is 94565 for both Pittsburg and Bay Point, the area code is 925 and it is also the home of Larry Flicks San Francisco Bay Area Floor Stores Hardwood Flooring Installation centers and home improvement design stores proudly serves the East Bay communities of Rio Vista, Elk Grove, Davis, Rancho Cordova, Galt, Lodi, Stockton, Manteca, Modesto, Tracey, Antioch, Oakley, Sacramento and Brentwood. The Floor Stores proudly serves the North County communities of Ross, Larkspur, Mill Valley, Tiburon, Sausalito, Belvedere, Stinson Beach, Bolinas, San Anselmo, Woodacres, San Geronimo, Terra Linda, Novato and Kentfield.

San Rafael California North Bay Area Tile Store Locations

The city of San Rafael is located in the North Bay region of the San Francisco East Bay Area. Centrally located in Marin County is the Floor Stores San Francisco North Bay Area Green Flooring Installation centers and home improvement design depots. San Rafael, California is the county seat of Marin County located in Northern California. The Floor Stores San Rafael location proudly serves the North County communities of Ross, Larkspur, Mill Valley, Tiburon, Sausalito, Belvedere, Stinson Beach, Bolinas, San Anselmo, Woodacres, San Geronimo, Terra Linda, Novato and Kentfield. Proudly Serving the Northern California cities of Ross, Larkspur, Mill Valley, Tiburon, Sausalito, Belvedere, Stinson Beach, Bolinas, San Anselmo, Woodacres, San Geronimo, Terra Linda, Novato and Kentfield.

Santa Rosa California North Bay Tile Location

Santa Rosa is the county seat of Sonoma County, California. As of January 1, 2007, the population of Santa Rosa was approximately 157,985 residents. Santa Rosa is the largest city in California's Wine Country and fifth largest city in the San Francisco Bay Area, after San Jose, San Francisco, Oakland, and Fremont. Santa Rosa sits at the southwestern gateway to the Sonoma and Napa Valleys of California's famed Wine Country. Santa Rosa is also the home of The Floor Stores Northern California Sacramento Area Santa Rosa Laminate Flooring Installation Stores and discount home improvement depots. Proudly Serving the Northern California cities of Peteluma, Sonoma, Vineburg, Glen Ellen, Cotati, Rohnert Park, Sebestopol, Napa, Calistoga, Yountville Angwin, Windsor, St Helena and Deer Park.